0:27 (27 sec)Compact contour hot stamping: fixture rotation and roller contact
An edited operating clip showing fixture-supported rotation and roller contact on a small rounded workpiece.
Open video notesHeat transfer video atlas
Heat transfer and hot stamping in action
Find factory clips by mechanism, process, workpiece or automation station.
24 clips4 viewing themes
0:27 (27 sec)
0:30 (30 sec)Roll-to-roll foil path and registration hardware
An edited clip showing foil threading, the physical registration-sensor adjustment point and flat-head movement.
Open video notes
0:26 (26 sec)Tapered cup: film movement and roller contact
An edited operating clip showing transfer-film movement, roller contact and a tapered cup during decoration.
Open video notes
0:06 (6 sec)Tapered pail: transfer contact close-up
An edited close-up showing the transfer roller, film and tapered pail surface during a cycle.
Open video notes
0:07 (7 sec)Curved workpiece and roller contact
A short view of a transparent curved workpiece moving beneath a roller contact head.
Open video notes
0:05 (5 sec)Flat press area and foil path
A close operating view of a flat press mechanism and plain metallic foil path.
Open video notes
0:04 (4 sec)Large-radius fixture and contact head
A close view of a contact head moving over a large-radius fixture area.
Open video notes
0:08 (8 sec)Twin rollers and material path
A short mechanical view of twin rollers and a plain green material strip.
Open video notes
0:04 (4 sec)Enclosed turntable fixtures
A brief view of fixtures indexing inside an enclosed turntable work area.
Open video notes
0:08 (8 sec)Turntable fixture and contour station
An edited view of a fixture moving through a contour-processing station.
Open video notes
0:08 (8 sec)Guarded rotary pressing cycle
A guarded work area showing a rotary fixture and pressing mechanism cycling.
Open video notes
0:08 (8 sec)Flat workpiece and film positioning
A gloved hand positions a plain flat workpiece beside the film path.
Open video notes
0:06 (6 sec)Large flat pressing area
A close mechanical view of movement inside a large flat pressing area.
Open video notes
0:07 (7 sec)Contour-following contact motion
An irregular workpiece rotates while the contact assembly follows its visible contour.
Open video notes
0:08 (8 sec)Decorated line along a contoured edge
A close view of a plain metallic decoration line following a shaped edge.
Open video notes
0:10 (10 sec)Dual film paths and pressing heads
A wide view of two film routes and pressing assemblies in one work area.
Open video notes
0:10 (10 sec)Cup turntable with blank workpieces
Blank white cup-shaped workpieces index through a rotary station.
Open video notes
0:05 (5 sec)Handle-decoration workstation
A wide operating view of a work head, film route and rotary fixture for handle-shaped parts.
Open video notes
0:10 (10 sec)Preform elevator guide path
Plain white preforms move through the green guide section of an elevator mechanism.
Open video notes
0:10 (10 sec)Flat press table and film mechanism
A flat worktable, press head and film mechanism move through a short operating cycle.
Open video notes
0:06 (6 sec)Press head over a metal fixture
A press head moves over a plain metal fixture in the working area.
Open video notes
0:05 (5 sec)Rotary transport of a blank workpiece
A rotary mechanism, white roller and blank workpiece move through a transfer position.
Open video notes
0:09 (9 sec)Vertical metallic foil guide path
A close view follows plain metallic foil through a set of guide rollers.
Open video notes
0:06 (6 sec)Blank turntable workstation
A close view shows an unloaded rotary table moving beneath a workstation head.
Open video notesNo matching videos. Try a shorter search or select all videos.